Compressed Air & Filtration Tips
Practical, field-tested guidance on specifying, maintaining and cross-referencing industrial filters — from compressor intake elements and oil separators to cleanroom HEPA panels, dust cartridges and liquid filtration.
Latest articles
Showing 6 of 12 guides
When to Replace an Air Compressor Air Filter: 7 Signs and a Practical Interval
Change an intake element on differential pressure and environment, not on a calendar guess. Seven field signs that say the filter is done, and how to set a service window that protects the compressor without throwing away usable media.
Read the article
Air Filter Housing Sealing: Why a Correct Element Still Lets Dust Through
A perfectly specified element cannot protect an airend if the housing leaks. Where dust bypass happens, how to test for it, and the end-cap profiles that actually hold a seal under vibration.
Read the article
Cellulose vs Synthetic Filter Media: Choosing Paper for the Actual Duty
Efficiency, dust holding capacity and moisture behaviour do not move together. How cellulose, blended and fully synthetic media differ, and what those differences mean for service intervals.
Read the article
Oil Carryover in Screw Compressors: Diagnosing a Failing Air-Oil Separator
Oil in the air line is a symptom with at least six possible causes. A step-by-step diagnosis that separates a failed separator from a blocked scavenge line, wrong oil, overfill or a stuck minimum pressure valve.
Read the article
Internal vs External Air-Oil Separators: How to Identify the Right Type
Two separator families, very different fitting logic. A field guide to telling an in-tank coalescer from an external spin-on unit, and the dimensions that must match before you order.
Read the article
ISO 8573-1 Compressed Air Quality Classes: A Practical Buyer Map
What the three numbers in a compressed air purity class actually mean, how to turn them into a filter train, and where over-specifying quietly wastes energy.
Read the article
What a 0.2 bar Pressure Drop Really Costs in Compressor Energy
A loaded filter is not just a maintenance item, it is a permanent surcharge on the electricity bill. A simple way to size that cost and decide the economic change-out point.
Read the article
EN 1822 Filter Grades from G4 to H14: Specifying Clean Air Correctly
Pre-filter, medium filter, HEPA: what each grade is actually for, why MPPS matters, and how a staged air handling chain protects the final filter rather than wasting it.
Read the article
Selecting Dust Collector Filter Cartridges for Fine and Abrasive Dust
Air-to-cloth ratio, media treatment and pulse cleaning settings decide whether a cartridge lasts two years or two months. What to check before changing supplier.
Read the article
Vacuum Pump Exhaust Smoke: Oil Mist Filter Diagnosis and Replacement
Visible exhaust smoke, rising back pressure and oil on the bench are all traceable to a short list of causes. A maintenance sequence for rotary vane and screw vacuum pumps.
Read the article
Beta Ratio and Micron Rating: How to Read a Liquid Filter Datasheet
A "10 micron" label says very little on its own. Beta ratio, absolute vs nominal rating and dirt holding capacity are the numbers that predict actual system cleanliness.
Read the article
Cross-Referencing OEM Filter Part Numbers Without Guesswork
A part number is a starting point, not a specification. The information to collect for a safe replacement, how to handle superseded numbers, and where visual matching goes wrong.
Read the articleNo guides match these filters.
Need a specific replacement element?
Tell us the OEM part number and machine model. Our technical team will confirm dimensions, end-cap profile and media grade before quoting.



